Tag Archives: JDM Engineering

2006 SPEEDLAB DRAG CAR (06-0001SL) OFFERED ON eBay

Price: $115,000.00
VIN: 1ZVFT82H865195907
Condition: Used
Vehicle Title: Clear
Year: 2006
Make: Ford
Model: Mustang
Trim: SALEEN EXTREME S351 001S
Engine: 351 SUPERCHARGED
Number of Cylinders: 8
Fuel Type: Gasoline
Transmission: Automatic
Drive Type: RWD
Mileage: 0
Sub Model: BERYLLIUM #001S SALEEN EXTREME 1 of 1 1000+ HORSE
Body Type: Coupe
Warranty: Vehicle does NOT have an existing warranty
Options: Leather Seats
Exterior Color: Beryllium
Interior Color: Gray
For Sale By: Premium and Exotic Wholesale
eBay #: 291738683240

06-0001SL Drag Car
06-0001SL Drag Car
  • 2006 FORD MUSTANG BERYLLIUM #-001S
  • EXTREME RACE CAR
  • CUSTOM HIGHEST LEVEL SALEEN MUSTANG EVER BUILT
  • 1 of ONLY 1 BUILT
  • Signed by Steve Saleen
  • ABSOLUTE MINT CONDITION
  • LIKE BRAND NEW INSIDE & OUT
  • SALEEN SPEEDLABS BUILT RACE CAR
  • 8 SECOND QUARTER MILE CAR
  • WAS NOT OFFERED TO PUBLIC TO PURCHASE
06-0001SL Drag Car
06-0001SL Drag Car

This car is beyond words, or the pictures I can provide. This 1000+ horsepower mustang, NHRA certified to do 8.5 seconds, and show quality without blemish to compete with some of the best cars ever built… Can’t be properly described with the words and pictures I can provide. When turned on, this car shakes our entire building, and it sounds absolutely incredible when revved up, almost deafening. If you are a serious collector, or horsepower freak, this car might be for you. There is only one car like this in the world, and it would have cost $200k plus to build. It is a Saleen Speed-labs built car, with one of the most beautiful beryllium orange paint jobs we have ever seen. There are many custom one ‘of’s’ on this car. It has tons of modification to reduce weight, including carbon fiber body panels (hood, trunk) as well as much more. It is around 1000 pounds less than a similar Saleen. This car was owned by Ed Hinker, Mustang enthusiast and close personal friend of Steve Saleen. When Steve was asked a couple months ago about the value of this car, he said at least $130k. We are able to offer a collector this opportunity to purchase at a fantastic price. This is a LOT more car than a Cobra Jet, and much more unique. Don’t miss out on this beautiful Mustang.

06-0001SL Drag Car
06-0001SL Drag Car

I will include a partial modification list:

  • Custom Saleen Beryllium paint job
  • Saleen Extreme Carbon fiber body panels
  • Saleen Carbon fiber Supercharged hood (1 of 1 custom)
  • Saleen Carbon fiber rear trunk lid w/ wing delete
  • Saleen Carbon fiber S7 Racing seats
  • NHRA 8.50 certified legal roll cage
  • Window netting
  • Simpson racing harness
  • BMR Fabrication front radiator support (powder coated black)
  • BMR Fabrication K member (powder coated black)
  • BMR Fabrication A Arms (powder coated black)
  • BMR Extreme anti roll bar
  • Metco billet lower control arms
  • QA1 adjustable rear shocks
  • JDM custom drag springs
  • Currie 9″ custom built rear end (40 spline axles, locker diff, alum center section)
  • Strange light weight front and rear racing brakes
  • Saleen Series VI 5.4 supercharger
  • JDM custom built 5.4 Aluminum 3v long block
  • JDM custom CNC ported heads
  • JDM custom Comp camshafts
  • Kooks custom long tube headers 1 ΒΎ-3″
  • Kooks custom H pipe no cats 3″
  • Ford Racing GT500 Fuel system
  • Ford Racing 80lb injectors
  • Saleen ultimate cold air intake and mass air
  • ATI SFI approved harmonic balancer
  • UPR Billet tensioner arm
  • Meziere electric water pump
  • Battery relocation and Moroso shut off switch
  • Oversize cooling bucket for supercharger
  • TCI built 5R55S automatic transmission
  • JDM 5R55S catch can
  • Precision industries 2600 RPM multi disc stall converter
  • Axle Exchange aluminum driveshaft w/ loop
  • Bogart Custom 15″ racing wheels
  • Mickey Thompson ET street slicks
  • Mickey Thompson ET fronts

OFFERED BY
Premium and Exotic Wholesale
Call Dan
812-325-0701

Click here to participate in the discussion.

2008 SPEEDLAB DRAG CAR (08-0026DR) OFFERED ON eBay

Price: $97,500.00
VIN: 1ZVFT82H875200590
Condition: Used
Vehicle Title: Clear
Year: 2007
Trim: SALEEN STERLING DR
Engine: 302 SUPERCHARGED
Number of Cylinders: 8
Fuel Type: Gasoline
Transmission: Automatic
Drive Type: RWD
Mileage: 740
Sub Model: S302 EXTREME STERLING EDITION SALEEN DR 1 of 1
Body Type: Coupe
Warranty: Vehicle does NOT have an existing warranty
Options: Sterling Silver Plaque, Navigation, Leather Seats, CD Player
Exterior Color: Vapor
Interior Color: Charcoal
For Sale By: Premium and Exotic Wholesale
eBay #: 291657679735

08-0026DR Speedlab Drag Car
08-0026DR Speedlab Drag Car
  • 2007 FORD MUSTANG STERLING SALEEN
  • S302 EXTREME STERLING EDITION- DR
  • HIGHEST LEVEL SALEEN MUSTANG EVER BUILT
  • 1 of ONLY 1 BUILT
  • Signed by Steve Saleen
  • ABSOLUTE MINT CONDITION
  • 16 oz. STERLING SILVER PLAQUE
  • SALEEN SPEEDLABS BUILT RACE CAR
  • 9 SECOND QUARTER MILE CAR
  • ONLY 700 ORIGINAL MILES
  • WAS NOT OFFERED TO PUBLIC TO PURCHASE

We have just sold a S302E STERLING Mustang- This is the description for the PREVIOUS car, which gives some history into this S302E Sterling DR

08-0026DR Speedlab Drag Car
08-0026DR Speedlab Drag Car

This is no ordinary Mustang.. This is a Saleen Extreme S302E Sterling edition. One of the baddest mustangs ever built, period. Everything inside and out is ultra high quality, and that of a supercar. It is extremely limited. There were only 25 of these cars produced, 6 of them were destroyed, 9 of them are not in the country. Making this one of 10 here in the states! There are two others available at this current moment being sold by the Mustang museum. Both of them are asking $97k. We have been lucky enough to get our hands on some of the ‘regular’ S302E Extreme mustangs, and they usually go for mid fifties with some decent mileage. We are offering this car at an ABSOLUTE steal. These cars were MSRP’d at $99,950, but many sold for way more money originally. This one sold for $120k new. This is Saleen & Mustang history. This car is in MINT condition, inside and out. All original. It comes with TWO leather Saleen jackets, the 16 ounce sterling silver plaque, and everything else you would hope for. Don’t miss out on this one of a kind super-car.

This is the S302E- STERLING DR #26. Although this car is listed as #26, it is the very first Sterling to be produced. This car was built, and immediately sent to Saleen Speedlabs to create the ultimate race car. This car produces 835 HORSEPOWER at the engine, which creates over 700 wheel horsepower. This car can HOOK it also. After the Sterling was given to the Speedlabs, over $130k was invested into the car to turn it into what it is today. This car is non-duplicatable, but if it was, it should cost close to $200k to produce. It comes with TONS of extras as well, including the original sterling wheels, Saleen seats, and a bunch more! This car is programmed to run on race fuel, or can easily be programmed for 93 octane as well. This car is so powerful it can do a wheelie!!! This is the ultimate mustang, with every top quality part possible thrown at it. The seats are carbon fiber Saleen S7 seats, which cost well over $5k.. if you can even find a set for sale. There are many more details for this car, but I don’t want to end up with a book here. This is a 700 mile, 1 of 1 SUPERCAR being offered. This can easily be a your show car or weekend warrior. Don’t miss out on this VERY special Mustang.

08-0026DR Speedlab Drag Car
08-0026DR Speedlab Drag Car

OFFERED BY
Premium and Exotic Wholesale
Call Dan
812 325 0701

Click here to participate in the discussion.

JDM ENGINEERING COMPLETES THEIR SPEEDLAB EXTREME DRAG MUSTANG

From our friends at JDM Engineering.

JDM Engineering shows off their Speedlab race Mustang from the 2006 NMRA season. This Speedlab Mustang had a number of upgrades and exterior changes planned for the 2007 season, but was never completed, until now.

Congratulations to Ed Hinker for adding this bright Beryllium painted Speedlab Extreme race car to his collection!

[Source: JDM Engineering]

SALEEN STERLING SUPERCHARGER, JDM EDITION

From our friends at JDM Engineering.

This is a custom Saleen Series VI Supercharger we built for our Race car. After we found out it wouldn’t clear the hood for obvious reasons we took it off and sold it to a customer of ours in Iceland. He figured it was worth getting a Cowl hood to put it on his Saleen 25th anniversary Sterling Mustang!

[Source: JDM Engineering]

JDM ENGINEERING OFFERS ONE-OFF SALEEN HOOD

From our friends at JDM Engineering.

2010-2012 Mustang Hood Custom One off Saleen Hood!

This is the hood from the 2010 JDM Mustang Drag Car. The hood was custom made by Saleen for JDM Engineering to use with the Saleen Super Shaker Supercharger Kit. The hood can also be used with the FRPP Shaker or CDC Shaker Kits. It is in pristine condition!! Asking $749 plus shipping but will take reasonable offers πŸ™‚

[Source: JDM Engineering]

JDM 4.6L 3V 302E STROKER ROTATING ASSEMBLY SPECIAL

JDM Engineering 4.6L 3-Valve 302E Stroker Rotating Assembly Engine Rebuild Kit

Retail $2595.00

Special Price $2095.00
Priced for a limited time only!!!
Savings $500!!

Is it time to rebuild your 2005-2010 Mustang GT 4.6L 3-Valve bottom end? If your making more power than you should on your stock engine or you are looking to bring your car to the β€œnext level,” then check this out! Team JDM now offers the same Rotating Assembly[/URL] from the popular 302E Shortblock[/URL] and will support 1000 HP. With the limited availability of New Production 4.6L blocks from Ford it is worth it to rebuild yours while you still can!

Team JDM is offering a complete packaged Forged Rotating Assembly Kit for the 4.6L 3-Valve Mustang engine. This package is based off the 302E Shortblock that JDM Engineering has assembled in-house since 2005 when the 3-Valve engine first appeared in production vehicles. JDM Engineering has used the 302 Rotating assembly in many of their own racing applications as well as hundreds of customers Street vehicles.

Increasing the displacement of your 4.6L short block from 281 to 302 cubic inches will create more power and torque. The extra displacement comes from the Kellogg Forged 8-bolt 3.800” crankshaft and Forged Manley Rods. The 302 Forged Pistons are standard (+.005”) bore and require only a light hone for assembly in any 4.6L block. For blocks that require a larger bore due to scuffing or wear, the pistons are available in +.020” and +.030” over size. Custom Piston Rings from Total Seal are file fit to the pistons and can support high boost applications. Nascar rated Speed Pro Main and Rod Bearings are included along with a complete Ford Racing Main bolt kit. A High Volume GT-500 oil pump is used to keep up with oiling demands of the 3-Valve VCT system.

JDM Engineering 4.6L 3-Valve 302E Stroker Rotating Assembly Engine Rebuild Kit benefits:
-Adds 21 Cubic inches of displacement to your engine
-Maximize your Shortblock’s power output potential
-Forged internals able to support 1000 HP
-Same rotating components used in JDM Engineering 302E Shortblock
-Custom spec pistons keep stock compression ratio

JDM Engineering 4.6L 3-Valve 302E Stroker Rotating Assembly Engine Rebuild Kit includes:
-Kellogg 3.800″ Crankshaft
-Manley H Beam Connecting Rods
-Manley Forged Aluminum Pistons (stock compression)
-Total Seal Piston Rings
-Speed Pro Main and Rod Bearings
-Ford Racing 3v Main Bolt Kit
-Ford Racing GT500 Oil Pump

JDM Engineering 4.6L 3-Valve 302 E Stroker Rotating Assembly Engine Rebuild Kit fits:
-2005 Mustang GT 4.6L 3-Valve
-2006 Mustang GT 4.6L 3-Valve
-2007 Mustang GT 4.6L 3-Valve
-2008 Mustang GT 4.6L 3-Valve
-2009 Mustang GT 4.6L 3-Valve
-2010 Mustang GT 4.6L 3-Valve

For more information or to place an order please contact us at www.TeamJDM.com or call 732-780-0770.

Click here to participate in the discussion.